LQ-12 L Single Station Twin Head Automatic Blow Molding Machine

• After-sales Service: 30
• Warranty: 2
• Single Station: Single Station
• Transport Package: Wooden Case
• Specification: 12
• Trademark: LQ
• Model NO.: LQ-12 L
• Origin: China

Product Description

Introduction:

Basic Machine

Carriage with linear motion system

1. Consisting of machine frame, extruder base frame and rear mounted control cabinet
2. Horizontal mold carriage movement forward/backward on linear roller bearings
3. Parallel opening/closing of blow mold, mold clamping area unobstructed by tie bars, fast build up of clamping  force, variation in mold thickness possible
4. Extrusion head lifting/lowering allowing continuous high parison extrusion head

Hydraulic Unit

Integrated in the machine frame

1. Bosch-Rexroth servo variable speed pump and high pressure dosing pump, accumulator assisted, with energy saving function

2. Oil cooling circuit equips with heat exchanger, temperature control and maximum oil temperature alarm

3. Electrical monitoring of oil filter pollution and low oil level

4. Hydraulic oil temperature controlled by PLC, ranging from 30oC~40oC

5. The hydraulic unit is delivered without oil

6. Tank capacity: 400 Liters

    Drive power:18.5kW Bosch-Rexroth servo pump &7.5kW VOITH dosing pump

Specification

Basic  Parameter
Applicable Material	PE, PP,.....
Max. Product Volume	Twin head 5L
Machine Size (L×W×H)	4×2×3.2(M)
Machine Weight	7.8T
Total Power	56KW
Power Consumption	32KW/H
Plasticizing System
Specification	good plasticizing capability, high output, transducer adjust speed, collect temperature-control signals to prevent the screw from cold starting
Speed Reducer	hard-teeth, low noise & wear-resistant speed reducer
Machine Barrel Screw	∮70mm,L/D=24, 38CrMoALA high quality nitrogen steel
Plasticizing	90Kg/H
Heating Zone	3 Zone  Casting, aluminum heater
Heating Power	11.6KW
Extrusion Motor	three phase asynchronism motor (380V,50HZ),22KW
Cooling fan	3 zones    85W
Extrusion System
Specification	Center input die head , product weight adjustable
Die Head	38CrMoALA high quality nitrogen steel
Distance between head	250mm
Heating Zone	3 zone  heat coil of stainless steel
Central distance of die head	240mm
Heating Power	9.6 KW
Open and Clamping System
Specification	Gear wheel and rack in-phaseaim at twin shaft clamping device, and cylinder
Clamping Force	110KN
Mold Move Stroke	240~620mm
Mold  platen Dimension	W×H:530×520mm,
Mold thickness	240-288mm
Electric Control System
Specification	Standard PLC and colorful touch screen for blow molding machine
Touch Screen	Colorful touch screen, auto alarm, diagnose the system
Temperature Module	Taiwan I-7018RP automatic temperature module, digital
Action control	Japan Mitsubishi, programmable PLC
Protection Function	Automatic alert and breakdown feedback double protection of mechanical apparatus
Hydraulic System
Specification	Proportion pressure controller changing direction quickly and softly
Oil pump motor	three phase a synchronism (380V,50HZ),11KW
Hydraulic pump	Vane  pump
Hydraulic valve	imported hydraulic components
System pressure	100kg/CM2
Pipes	Bilayer high pressure blast pipes
Cooling Mode	Water cool and oil cooler separately
Pneumatic System
Specification	imported famous brand pneumatic pressure
Air Pressure	0.6Mpa
Air Consumption	0.8M3/min
Valve	TAIWAI  AIRTAC
Cooling System
Specification	mold,barrel,oil box adopt independent cooling waterway
Cooling Medium	water
Water Consumption	60L/min
Water Pressure	0.2-0.6MPa
Parison controller system (Optional)
Specification	Parison programmer is used to control the thickness of the bottle in high precision, it is a optional system for blow molding machine. Japan MOOG 100points can be adopt to the machine