LQ-68X/110X/130X-J5 Servo Injection Molding Machine

• After-sales Service: 30
• Warranty: 2
• Servo Injection Molding: Servo Injection Molding
• Transport Package: Wooden Case
• Specification: 68 110 130
• Trademark: LQ
• Model NO.: LQ-68X/110X/130X-J5
• Origin: China

Product Description

LQ-68X/110X/130X-J5 SERVO INJECTION MOLDING MACHINE

Performance
The system pressure and flow of the servo injection molding machine are double closed-loop, and the hydraulic system supplies oil according to the actual flow and pressure, which overcomes the high energy consumption caused by the high pressure overflow of the common quantitative pump system. The motor works according to the set speed in the high flow stage such as pre molding, mold closing and glue injection, and reduces the motor speed in the low flow stage such as pressure maintaining and cooling. The oil pump motor actually can Consumption has been reduced by 35% - 75%.
The advantages of servo injection molding machine, such as energy saving, environmental protection, high repetition accuracy, reliability and durability, have been favored by the market and praised by users.

Specification

Model		LQ-68X-J5			LQ-110X-J5			LQ-130X-J5			LQ-170X-J5			LQ-230X-J5
		A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
INJECTION UNIT
Screw Diameter	mm	28	30	32	35	38	42	38	42	45	40	45	48	45	50	55
Screw L/D Ratio	L/d	24.6	23	21.6	24.6	24.3	22	24.3	22	20.5	24.8	22	20.6	26.6	23.96	21.8
Shot size	cm3	86	99	113	168	198	241	215	263	302	284	360	410	397	490	593
Injection Weight (PS)	g	78	56	103	153	180	219	196	239	275	258	328	373	361	446	540
Injection Rate	g/s	49	56	63	95	122	136	122	150	172	96	122	138	103	128	155
Plasticizing Capacity	g/s	6.3	8.4	10.3	11	12	15	11	14	17	16.2	20	21	19	24	29
Injection Pressure	Mpa	219	191	168	219	186	152	176	145	126	225	178	156	210	170	140
Screw Speed	rpm	0-220			0-220			0-220			0-185			0-185
CLAMPING UNIT
Clamp Tonnage	KN	680			1100			1300			1700			2300
Toggle Stroke	mm	300			320			360			430			490
Space Bet. Tie-bars	mm	310x310			370x370			430x415(415x415)			480x480(470x470)			532x532
Max.Mold height	mm	330			380			440			510			550
Min.Mold height	mm	120			140			140			170			200
Ejector Stroke	mm	80			100			120			140			140
Ejector Tonnage	Kn	38			45			45			45			70
Ejector Number	PC	5			5			5			5			9
OTHERS
Max.Pump Pressure	Mpa	16			16			16			16			16
Pump Motor Power	Kw	7.5			11			13			15			18.5
Heater Power	Kw	6.15			9.8			9.8			11			16.9
Machine Dimension	m	3.4x1.1x1.5			4.2x1.15x1.83			4.5x1.25x1.86			5.1x1.35x2.1			5.5x1.42x2.16
Machine Weight	T	2.6			3.4			3.7			5.2			7
Oil Tank Cap	L	140			180			210			240			340