LQ WING 5000 Rubber offset Printing Blanket

Product Description

Product Description

LQ WING 5000 Type Printing Blanket has been developed specifically for sheet-fed offset presses operating at a speed of 15,000 sheets per hour.
Optimal compressible layer minimizes machine movement and resists cutting edge marking in the image.
Suitable for: Sheet-fed Packaging, Sheet-fed Commercial, Coating/Varnishing.

Product Parameters

Colour	Blue
Rubber Surface	Precision grinding
Elongation:	≤0.9%
Thickness	1.96/1.70±0.02mm
Layer	3 ply
Hardness	76-80° Shore A
Ink compatibility:	Sheet
Tensile strength:	=80

Problem solving
Pre-sales Q&A

Question	Answer
1.What types of printing blanket are there?	Common types include full air cushion, air cushion, three-in-one, traditional, UV special, local gloss, metal printing 2PSC, wear-resistant, paper cup special, UV self-adhesive, report machine self-adhesive, aluminum strip, etc.
2.How to choose the right printing blanket?	It is selected according to the type of printing machine, material of printed products, printing technology (such as UV printing, metal printing, etc.), printing quality requirements (such as dot reduction, ink transfer, etc.) and printing environment, etc.
3. Does the thickness of blanket affect printing?	It has influence. The thickness will affect the distribution of printing pressure and the transfer effect of ink. Different printing machines and printing requirements have different requirements for blanket thickness.
4. What is the function of surface treatment of blanket?	Surface treatment can improve the ink transfer performance, wear resistance, chemical resistance and so on of blanket, so as to improve printing quality and extend service life.
5. How long is the life of blanket?	The life depending on the frequency of use, printing conditions, maintenance and other factors.
6.Is the price difference of blanket large?	The price difference is large, mainly affected by material, process, brand, specification and other factors.
7. What should be paid attention to when installing blanket?	When installing, make sure the blanket is flat, no wrinkles, no bubbles, and adjust the pressure and tension correctly.
8.What are the storage requirements for blanket?	It should be stored in a cool, dry environment away from heat sources and avoid direct sunlight. It is best to place it flat or hang it on a pole.
9.What are the suggestions for cleaning and maintaining blanket?	After printing, it should be cleaned in time to avoid the accumulation of ink, paper scraps and other residues; Check the surface of the blanket regularly for damage or aging.
10.What information is required when purchasing blanket?	The printing machine model, printing paper type, printing process requirements, printing quality requirements and other information should be provided.

 

After sale Q&A

Question	Answer
1.What should do if the printing area of blanket is blurred and not complete?	Check whether the printing pressure is accurate, whether the pad is damaged, whether the blanket is damaged by impact, whether the printing plate is blind, and replace the blanket when necessary.
2.What is the reason for the blanket strip to fall off?	It may be due to the blanket being stretched too tightly, the installation of the strip is not proper, the use of the strip is not proper or the installation on the printing machine drum roller shaft is not proper.
3.How to solve the swelling of blanket surface?	Check the thickness of the blanket and lining, clean regularly with a high quality cleaning agent, and replace if the blanket is old or not suitable for the ink used.
4.What is the cause of printing dot shadow?	It may be due to improper installation of blanket, excessive printing pressure, too much ink or plate dot movement.
5. What should do if the blanket is de-layered with ink?	Check whether the blanket is corroded by solvent, whether it is squeezed too much, whether the ink is piled up at the edge, etc., and replace the blanket when necessary.
6.What is the reason for the increase of printing dots?	It may be due to the excessive pressure of the ink roller, too low hardness, improper selection of ink, imbalance between ink and water, excessive pressure between printing plate and blanket cylinder, and between blanket and impression cylinder.
7.How to deal with the accumulation of paper dust and paper powder on the surface of blanket?	Blanket should be cleaned in time to keep its surface clean and prevent the accumulation of impurities from being too thick to lose the elasticity of rubber layout.
8. What should do if the blanket is aging?	Blanket should be replaced in time, and its storage and use environment should be checked to see if it meets the requirements.
9.What if the tension of the blanket is not enough?	The tension of the blanket needs to be readjusted to ensure good contact with the plate throughout the printing process.
10.What should do when the blanket life is over?	New blanket should be replaced in time, and the old blanket should be properly handled.

 

Company Profile

Superiority

Our Customers

Exhibitions

Our Services

Pre-sales Service
We provide all information and materials of our products to the valuable customers and partners so as to support their business and development. We also will give a preferential price for the first few machines, the samples for the printing, packaging and consumables are available, but the freight should be borne by the customers and partners.

In-sales Service
The delivery time of the ordinary equipment is generally 30-45 days after receipt of deposit. The delivery time of the special or large scale equipment is generally 60-90 days after receipt of the payment.

After-sales Service
The quality guarantee period of the product is 13 months after leaving the Chinese port. We can provide customers with free installation and training, but the customer is responsible for round-trip tickets, local meals, accommodation and engineer allowance.
If the product is damaged due to customer's incorrect handing, the customer should bear all the costs including the costs of spare parts and freight charges etc. During the warranty period, if it is damaged caused by our manufacturing failure, we will provide all repair or replacement free of charge.

Other Service
We can design special products according to customer's requirements on various aspects, including style, structure, performance, color etc. In addition, OEM cooperation is also welcome.