| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Certification: | ISO9001 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description--Feeder
1.Machine adopts Invertor motor (Siemens brand)22KW
2.Machine Clutch
a-When machine open and close, the button switch automatically controls the machine clutch and come with the alarm continuously. While running, the alarm goes off continuously to ensure the safety of operators.
3.Front Lead Edge Feeding System
a-Four axis front lead edge feeding paperboard, increase fan flow rate, make the high-speed or low-speed feeding more accurate.
b-The baffle position using digital computer and electric control.
c-Continuous or skip feed.
d-With paper counter, setting and display production quantity.
4.Machine Operation Speed
a-Under the speed 160 sheets per minute, the speed will be adjusted to the best fitness and efficiency to the operator.
5.Main transmission gear (China Brand)
a-All transmission gears are high-quality steel, grinding, hard chromium plating, Rockwell hardness >60 degrees.
6.Automatic zero device
a-Automatic zero setting of printing, slotting unit.
b-Automatic zero setting is applied to general carton; one trial printing may adjust the carton to the correct position so as to avoid unnecessary printing waste.
Product Description--Printing Transfer 2 Units
1.Printing Roll
a-External diameter 443mm (diameter including sheets 457 mm). Standard plate thickness 4-7.2mm
b-The steel roller surface is polished and chromed.
c-Equilibrium calibration and operation stability
d-Rudder-fixed plate rotating shaft
e-Loading and unloading printing plate, forward and reverse turning by electric foot switch control.
f-Roller surface with center line, convenient to hang printing plate.
g-Lateral adjustment: 12 mm (manual), vertical adjustment 360 (automatic).
2.Lower printing roll
a-The printing department uses Vacuum adsorption transport mode.
b-The embossing roller is made of extra thick seamless steel pipe
c-Steel roller surface polishing and chroming.
d-Equilibrium calibration and operation stability.
e- Automatic adjustment of the gap between printing roll and press roll. The range is between 2~9mm.
3.Anilox roller(Hai-li brand)
a-External diameter200mm.
b-Thick wall steel pipe surface fine textured pressing
4.Rubber roller
a-The thick seamless steel roller by fine grinding.
b-Steel roller surface cladding resisting rubber.
c-The rubber roller has special crown grinding. The ink transmission effect is good.
d-Rubber roller gap adjustment adopted by self luck design. The adjustment range is ±3 mm.
e-Quick Automatic cleaning the printer. See the following explanation
5.Position adjustment mechanism
We can select the box size according to carton shape
a-Planetary gear design structure.
b-All transmission gears adopt high-quality steel, grinding, hard chromium plating process. The Rockwell hardness is >60 degrees. Automatic 360 adjustment electrical phase(operation and idle phase).
Product Description--Die-cutting unit
1.487mm in diameter
Die cutter roller (down roller)
The die cutting roller fit 25.4mm mold
a-Die cutter roller is high-quality steel, surface grinding, hard chromium plated.
b-Balance correction, increase the running stability.
c-Die-cutter fixed screw hole spacing, axial 50 mm and 18 uniform radial.
d-Automatic zeroing of the position.
e-The screw hole on the surface of the cutter mould roller is provided with a steel wire tooth sleeve.
2.Rubber cushion roller (up roller)
a-Rubber cushion roller is high-quality steel, surface grinding and hard chromium plated.
b-Balance correction, increase the running stability.
c-Rubber cushion thickness is 10 mm
d-Rubber cushion roller mechanical screw directional move 50 mm, lateral structure.
e-The gap adjustment between rubber cushion roller and die cutter roller is automatic, adjustment range is 0-16 mm. The motor power is 0.37kw
f-Rubber cushion roller cutting equating structure, to keep the cushion smoothly. The motor power is 0.37kw.
3. Position adjustment part
a-Planetary gear structure.
b-All transmission gears are high-quality steel, grinding, hard chromium plated, the Rockwell hardness is >60 degrees.
c-Automatic 360 degree adjustment (operation and idle phase). The motor power is 0.75kw.
4.Independent operating computer platform
The computer screen size is 14 inches
a-Independent computer console, can store common orders and operating procedures
b-ERP production management system interface can be reserved to check the work order at any time.
c-The electric adjustment part of the whole press can be operated by computer.
Product Description--Auto Folder Gluer
1.Feeding Section
a-Motorized and PLC control of feeder side guides, touch screen datum to set up the device,
b-speed of the paper can be automatically adjusted according to the speed of the printing machine.
2.spray glue system
3.folding section
a-The main driving belt is attached with air suction device;
b-The machine is downward folding system;
c-Right and left rocker arm adjusted by motor and PLC, touch screen set up the datum.
d-Install the latest design "folding control device" ,allows double press positioning, to achieves more precise gluing.
e-Adjusted by motor and PLC, touch screen set up the datum
4.driving section
a-Frequency conversion motor runs synchronizely with printer.
All synchronism belts driving are structure simple, noise lower, running steady and vibrate lower.
Moving parts are imported of ball screws and straight line rail.
5.high speed counting ,stacking and export section
a-Photoelectric sensor counting precisely
b-Three group of servo motor finish the function of precise counting ,stacking and transferring out while high speed running.
c-Server control high speed separating bar to stack according required quantity per pile.
geomatic assistant supporting bars make boxes stacking flat.
e-Pile boxes ejected by pneumatic pushing plate in order.
f-Strong wind pressure which direction can be adjusted anywhere protect boxes bend upwards.
g-Backboard motorized move adjusting (automatically or manually) according box' s spec.
h-Both up and lower convey belts transfer pile boxes together.
i-The height of up belt can be adjusted automatically or manually according the quantity per pile.
6.Automatic packing machine
a-With the features of stable knotter, fast automated setup changers, smooth bundle control, transport using inverter drives and the latest forking arm technology, the reliability of the machine and low maintenance cost can be achieved. The machine are applied in the different type of high speed inline FFG.
b-PLC control with Preface touch panel operator interface
c-Automated setup system resets to the dimensions of the first bundle of the new size at the push of a button or signal from the upstream equipment
d-Electrically driven, inverter controlled squaring and top/bottom conveyors provide smooth bundle transport.
| Specification | Parameter description |
| Max Operation Speed | 180pieces/minute |
| Maximum sheet size (continuous feeding) | 1400*2300 MM |
| Alternate feed size | 1600*2300 MM |
| Minimum sheet size fed | 360*600 MM |
| Maximum printing area | 1400*2200 MM |
| Printing cylinder lateral adjustment | 16 MM |
| Printing plate thickness (including the board) | 7.2 MM |
| Maximum carton height (stacker) | 1600mm |
| Computerized operation system( 999 sets order storage) Touch screen operation Language can be changed to Burmese language under some circumstances. For example, the local language must translate by customer side and provide the word file to seller) |
999 sets memory storage |
| Machine power | 60KW |
A trading brand enterprise which is invested by industry and joint industry and trade.
ShangHai UPG International Industry & Trade Group Co., Ltd. is a professional trading company which is invested by UP Group's key branch enterprises together, the company has become the most active and influential brand in the printing and packaging machinery industry in China.
We own high efficiency, high quality, stable and professional trade working team.
In the long-term practice of trading, we foster and establish a multilingual, professional, high diathesis and qualification staff team, which form the biggest and most powerful trading enterprises in this industry. Among our working team, 97% obtain the associate degree and bachelor degree, 40% own intermediate level professional titles, master degree or above.
We adhere the philosophy that "over-value service, pioneering and pragmatic, and Win-win cooperation".
We start from innovation system, improve the institutional mechanism, gradually cultivating and forming a value pursuit, and enterprise culture which specialize in "Honest and trustworthy, Diligent and promising, Pursue excellence and efficiency, over-value service". We always ensure the quality of the products and service, establish long-term and stable relations of cooperation with domestic suppliers as well as our foreign customers for mutual benefits.
Superiority of abundant resource, matching into a line, high optionality.
We centred on printing machinery manufacturing and have established long term strategic collaborations with more than 50 cost-effective, high quality and reputation brand enterprises and factories, which cover printing and packaging, food and pharmaceutical packaging, printing consumables and rubber& plastic machinery, and form a multi-category, multispecies and multilevel integrated superiority and provide a convenient service channel for foreign customers.
Well planned, high input, extensive coverage exhibition publicity.
The huge investment of more than 20 international professional exhibitions and more than one billion sales amount per year make our company known overseas and be of high reputation in domestic and abroad market.
Strengthen channel building, service to global customers, multiple trading strategic pattern.
Through several years' effort, we have exported products to more than 80 countries (not only Asia but also Europe, Africa, South America, North America and Oceania) and have established long term strategic collaborations with distributors and sales channels in more than 40 countries and regions, which play an important role for open foreign market and maintain service terminal clients.
UP Group's products have been exported to more than 80 countries.
In Southeast Asia, its products cover Thailand, Indonesia, Singapore, Malaysia, Brunei, the Philippines, Japan, Korea, Vietnam, Cambodia, India, Sri Lanka, Nepal, Dubai, Kuwait, Saudi, Syria, Lebanon, Maldives, Bahrain, Jordan, Sudan, Mongolia, Myanmar, Pakistan, Iran, Turkey and Bangladesh.
In European, its products cover Australia, New Zealand, Britain, France, Germany, Italy, Spain, Portugal, Georgians, Slovakia Finland, Poland, the Czech Republic, Russia, Ukraine, Belarus, Kazakhstan, Uzbekistan, Sweden, Bosnia, Herzegovina and Albania
In Africa, its products cover South Africa, Kenya, Ethiopia, Egypt, Morocco, Algeria, Tunisia, Madagascar, Mauritius, Nigeria, Ivory Coast, Ghana, Mali, Liberia and Cameroon.
In America, its products cover The United States, Canada, Mexico, Panama, Costa Rica, Brazil, Argentina, Columbia, Bolivia, Uruguay, Paraguay, Chile, Peru, Ecuador and Honduras.
Among these regions, we have more than 46 stable distributors and partners for many years.
Pre-sales Service
We provide all information and materials of our products to the valuable customers and partners so as to support their business and development. We also will give a preferential price for the first few machines, the samples for the printing, packaging and consumables are available, but the freight should be borne by the customers and partners.
In-sales Service
The delivery time of the ordinary equipment is generally 30-45 days after receipt of deposit. The delivery time of the special or large scale equipment is generally 60-90 days after receipt of the payment.
After-sales Service
The quality guarantee period of the product is 13 months after leaving the Chinese port. We can provide customers with free installation and training, but the customer is responsible for round-trip tickets, local meals, accommodation and engineer allowance.
If the product is damaged due to customer's incorrect handing, the customer should bear all the costs including the costs of spare parts and freight charges etc. During the warranty period, if it is damaged caused by our manufacturing failure, we will provide all repair or replacement free of charge.
Other Service
We can design special products according to customer's requirements on various aspects, including style, structure, performance, color etc. In addition, OEM cooperation is also welcome.
){kind=link}