LQ50-2L Single Station Automatic Blow Molding Machine

• Customization: Available
• After-sales Service: 30
• Warranty: 2
• Model NO.: LQ50-2L
• LQ50-2L Single Station Automatic Blow Mo: LQ50-2L Single Station Automatic Blow Molding Mach
• Transport Package: Wooden Case
• Specification: LQ50-2L Single Station Automatic Blow Molding Mach
• Trademark: upg
• Origin: China

Product Description

LQ50-2L Single Station Automatic Blow Molding Machine

 

Introduction:

Basic Machine

Carriage with linear motion system

1. Consisting of machine frame, extruder base frame and rear mounted control cabinet
2. Horizontal mold carriage movement forward/backward on linear roller bearings
3. Parallel opening/closing of blow mold, mold clamping area unobstructed by tie bars, fast build up of clamping  force, variation in mold thickness possible
4. Extrusion head lifting/lowering allowing continuous high parison extrusion head

Hydraulic Unit

Integrated in the machine frame

1. Bosch-Rexroth servo variable speed pump and high pressure dosing pump, accumulator assisted, with energy saving function

2. Oil cooling circuit equips with heat exchanger, temperature control and maximum oil temperature alarm

3. Electrical monitoring of oil filter pollution and low oil level

4. Hydraulic oil temperature controlled by PLC, ranging from 30oC~40oC

5. The hydraulic unit is delivered without oil

6. Tank capacity: 400 Liters

    Drive power:18.5kW Bosch-Rexroth servo pump &7.5kW  dosing pump

 

MODEL	LQ50-2L
Applicable Material	PE, PP....
Max. Product Volume	Twin head 800ml
Dry Cycle	2000 pcs/h
Machine Size (L×W×H)	2.9×1.8×2.1 (M)
Machine Weight	3390KG
Total Power	25KW
Power Consumption	14KW/H
Plasticizing System
Specification	good plasticizing capability, high output, transducer adjust speed, collect temperature-control signals to prevent the screw from cold starting
Speed Reducer	hard-teeth, low noise & wear-resistant speed reducer
Machine Barrel Screw	∮50mm,L/D=22, 38CrMoALA high quality nitrogen steel
Plasticizing	35Kg/H
Heating Zone	3 Zone  Casting, aluminum heater
Heating Power	8.2KW
Extrusion Motor	three phase asynchronism motor (380V,50HZ),11KW
Cooling fan	3 zones    85W
Extrusion System
Specification	Twin head
Center distance between twin head	130mm
Heating Zone	3 zone heat coil of stainless steel
Heating Power	4.5 KW
Die Heat Huff	Pressure and capacity can be adjusted
Preform Adjustment	By manual
Open and Clamping System
Clamping Force	30KN
Mold Move Stroke	128~368mm
Platen Dimension	W×H:300×320mm,
Mold thickness range	140~200(mm)
Electric Control System
Specification	Standard PLC and colorful touch screen for blow molding machine
Touch Screen	Colorful touch screen, auto alarm, diagnose the system
Temperature Control	Self-regulation
Temperature Module	Taiwan I-7018RP automatic temperature module, digital
Action control	Japan Mitsubishi, programmable
Protection Function	Automatic alert and breakdown feedback double protection of mechanical apparatus
Hydraulic System
Specification	Proportion pressure controller changing direction quickly and softly
Oil pump motor	three phase a synchronism (380V,50HZ),5.5KW
Hydraulic pump	Vane pump
Hydraulic valve	imported hydraulic components
System pressure	100kg/CM^2
Pipes	Bilayer high pressure blast pipes
Cooling Mode	Water cool and oil cooler separately
Pneumatic System
Specification	imported famous brand pneumatic pressure
Air Pressure	0.7Mpa
Air Consumption	0.3M^3/min
Cooling System
Specification	mold,barrel,oil box adopt independent cooling waterway
Cooling Medium	water
Water Consumption	30L/min
Water Pressure	0.2-0.6MPa
Parison controller system (Optional)
Specification	Parison programmer is used to control the thickness of the bottle in high precision, it is a optional system for blow molding machine. Japan MOOG 100points can be adopt to the machine