LQ-FM-C Model Flexo Printing Machine

• After-sales Service: 1 Year
• Warranty: 1 Year
• Printing Page: Single Faced
• Printing Color: 5 Colors
• Guide precision: 0.02mm
• Speed: 240m/min
• Model NO.: LQ-FM-C
• Gearing: 1/4cp
• Dia of web rollor: 100mm
• Transport Package: Wooden Case
• Trademark: UPG
• Origin: China
• HS Code: 8441100000

Product Description

Function Units
1. Unwinding Unit ( nonstop unwinder & rewinder device as optional )
Shaftless unwinding unit
Unwind unit 60"(1524mm)capacity
Mandrel 3" and 6" diameter
Hydraulic paper shaft lifting and descending device: mainly used for loading and unloading of paper rollers, no need of forklift or other handling tools
Web break sensor, automatically shut down when paper broken
2. Web Guide System
Paper Splicing Table : with pneumatic paper holding device.
Ball screw electric actuator
Adopt the photoelectric sensor for web guide transmission
 Electronic web guide traction device. If there is any excursion in paper feeding,the system will have a constant and accurate adjustment
Adopt closed loop control system to accurately detect the deviation and correct it
Hard Anodization to the paper guide HV 800-1000
Inspection:the edge
Web Guide precision:±0.02mm
3.In-feed Tension Control Unit
Use the double side pressure rubber roller to clutch and feed paper and to ensure the tension
Infeed unit with servo motor drive, epicyclic gear box
4. Printing Units(shaftless, single servo motor drive in each station)
Servo motor conrtol press cylinder,can realized the pre register function, the anilox roll and printing cylinder are gear box drive
Plate cylinders is desinged in petal type structure and the plates can be changed without tools and no need adjust the pressure.
The machine double sides frame is made of overall alloy and cast iron, which improves the stable performance and durability of the press machine
High precision ceramic anilox roll with micro-metric adjustment
Automatic horizontal and vertical registration.
Reversed single doctor blade
self-cleaning plate feature.The anilox and plate cylinders release alternately, transfering residual ink to the paper when machine stop, leaving the printing plates clean and minimizing the need of hand to clean the plates
When press stops, the anilox roll continuous running. Hence avoiding permanent damage, which is caused by ink drying on the anilox surface
Auto Register:
The first color printing unit is the benchmark and the following printing unit registers automatically according to the first color.
The automatic registration controller can adjust the phrase position of the servo motor according to the detected error, realizing the quick registration, improving the operating quality and the extent of automation, so the machine greatly reduces the labor intensity and attrition rate of raw materials

5. Drying Units
Every printing unit has one separate drying unit
High efficiency drying unit including infra red lamps, air blowing/suction system. Air intake adjustable,
Air circulation design on the exhaust, the blower is adjustable
Short wave infrared heating elements
Natural air blowing assembly with exhaust fan
6. Video Web Inspection System
Video is high efficiency and synchronous, can be moved left and right
With 14 inch monitor one piece
one stroboscope lamp
It can be enlarged 18 times of image

7. Out Feed Tension Control System
The rear tension unit is made of alloy and cast iron
Use the double side pressure rubber to cluth and feed and to guarantee the stale tension
unit with servo motor drive, epicyclic gear box

8..Rewinding Unit ( nonstop unwinder & rewinder device as optional )
rewind unit 60''(1524mm)capacity, with 3'' shaft
Hydraulic roll lift
Web break sensor, automatically shut down when paper broken.

9. Automatic Lubrication System
The gear's automatic dampening system can adjust the lubricating time and ration
When the dampening system breaks down or the lubrication is not enough, the indicator will alarm automatically.
10. Plate Mounter
It has a screen including the bilateral symmetrical split screen display
It is used for the plate mounting to realize the purpose of multi-color overprinting
One set image segmentation device
2 high definition cameras for magnifying
Quickly changes the printing plates

11. Web cleaner and anti static unit
To guarantee the cleanness of substrates
First remove static, then clean the dust in vacuum and then remove static

12. Corona Treater - Optional
To increase ink adhesion to film side